Chain Wheel Selection Guide
Please take a section of your chain, lay it out in a straight line and measure the dimensions shown below.
Please complete the table below the drawings with the dimensions and other information requested where it is known and forward to Maxwell Marine Limited.
| P = pitch inside link | L = length outside the link | D = Chain wire diameter |
| W1 = width inside link | W2 = width outside the link | L1= inside dimension between 11 links |
| Customer Chain Specifications |
| Manufacturer/Supplier name |
|
| Chain standard/code |
|
| Chain type: Short link/stud link |
|
| Manufacturers specification if known |
|
| Material |
|
| Grade |
|
| Finish |
|
| |
| P - Pitch length inside link |
|
| L - Length outside the link |
|
| D - Chain wire diameter |
|
| W1 - width inside the link |
|
| W2 - width outside the link |
|
| L1 - inside dimension between 11 links |
|
Download the Maxwell Chainwheel Guide spreadsheet 
|
|
| | |
