• Maxwell Ceases Production of the Freedom
• New Maxwell Distributor in the UAE
• Maxwell Releases All New HRC10 Windlass at China Boat Show 2010
• Maxwell Owner Manuals Now On This Website
• Maxwell Takes the Guesswork Out of Chainwheel Selection
• Superyacht business strong for Maxwell Marine
• New North American Appointment for Maxwell and VETUS
• New Multi Voltage Up/down Anchor Switch
• Maxwell Marine Windlasses are now Chain Counter Ready
• ALL NEW RC6 and RC8 STAINLESS STEEL ROPE/CHAIN WINDLASSES
• MAXWELL MARINE EUROPE
• NEW MANAGER FOR MAXWELL AUSTRALIA
• MAXWELL Joins the VETUS Group of Companies
• MAXWELL INTRODUCES AN ALL NEW RC10 AUTOMATIC ROPE/CHAIN WINDLASS
• New Maxwell Hand Held Remote Control Unit
• Maxwell Funny and Happy Customer
• New VWC1000 and VWC1500 Windlass Update
• Satisfied Maxwell Customer
• New HRC Horizontal Rope/Chain Windlass from Maxwell Marine
• Maxwell Introduces Innovative Superyacht Windlass and Deck Gear
• On the Rode again: Anchoring tips by Nick Cohen

New Multi Voltage Up/down Anchor Switch

Maxwell has improved the Up/down Anchor Switch.

Effective immediately, the Up/down Anchor Switch P19220 (12V) and P19221 (24V), which is picture A, will be replaced with a multi voltage Up/down Anchor Switch, Product Code P102938, picture B.

The new P102938 switch will work on both 12V and 24V systems without the need to stock two separate parts.

Physically, the P102938 face plate is the same size as the P19220/P19221, the only difference is the location and number of the attachment screws, from two screws to four on the new model.

Electrically the switch is identical apart from the removal of the indicator light which has allowed for the same unit to be used on both 12V and 24V systems.

Installation of the switch is simple with only a single hole required in the dash, made with a 40mm hole saw , then the face plate can be secured using the four self tapping screws supplied.